Installation Manual

Electric tailgate installation manual for Toyota VOXY NOAH 70 2017+ without original suction lock (GOLD & PINK ECU)

Author : KAIMIAO

Update time : 2020-10-20 17:43:10

Electric tailgate installation manual for Toyota VOXY NOAH 70 2017+ without original suction lock (GOLD & PINK ECU)

Pls click here to download installation manual

Installation Precautions:
1. For safety and to ensure the normal use of the product, please install it by a professional installer. Do not disassemble the machine without permission to avoid damage to the machine and accident.
2. Before installing the product, start the engine first, check the function display of the car dashboard, the operation of the buttons in the car is normal, and the surface of the car is not scratched. If you have any questions, please report to car owner in time.
3. Check whether the tailgate opens and closed normally, check whether the lights are normal.
4. Turn off the engine and prepare related tools.
5. Installer should first remove the metal objects and other hard objects on their bodies to prevent damage to the car seat or interior during installation.
6. During the installation process, the removed automobile components should be put away to avoid scratching the instrument panel in the car. Debris left in the wiring should be disposed of in time and not left in the car. The joint must be insulated to prevent short circuit.
7. According to our wiring method, avoid affecting the moving parts of the car during the wiring process, such as the steering wheel drive shaft, accelerator and brake pedal and other vehicle control prats. Each wiring harness needs to be fixed after being routed to prevent it from coming loose.
8. Please connect each wiring harness according to our wiring method (Noted the position of the ground wire).
9. Do not insert or remove the connected plug while the power is on, otherwise the host or accessories may be damaged during plugging and unplugging.
10. If the key fob has a tailgate open button, press this button for 3s to open and close the tailgate. If don’t have, you need to press the unlock button 3 times to open and close the tailgate. If you have any problems, please contact our after-sales: info@kaimiao-group.com

Function Description:
After turning on, the door must be closed manually and the function can be used normally.
Note: Do not use screwdriver or other tools to lock the secondary lock as a door closing, otherwise a series of problems such as abnormal door opening and closing.

Control mode of door opening and closing	(1) Remote control door opening and closing: Press the remote control unlock key 3 times (some models press the trunk key for a long time) to control the trunk. Note: When pressing the unlock key, press 3 times at a constant speed within 4 seconds.
	(2) The original driver of the trunk picks the key: Control the opening and closing of the trunk. Note: The control mode is the same as that before installation, and will not take effect until the vehicle is unlocked.
	(3) Front key/central control unlock key: Press the front key for about 15s to control the opening and closing of the trunk; If the front key is not installed, press the central control unlock key of the original car 3 times to control the opening and closing of the trunk. Note: The function of opening the trunk by the front key will only take effect in the state of flameout or P gear, and the function of closing the trunk will take effect at any time. The functions of opening and closing the trunk by the central control unlock key will only take effect under the flameout state.
	(4) Trunk rear button: Press to control the trunk to close.
Anti-pinch function	In the process of opening and closing the door, if obstructions are encountered, the trunk will immediately stop to avoid accidents.
Buzzer reminder (During the process of opening and closing the trunk, there are corresponding sound reminders at different stages. When the electric absorption is abnormal, the buzzer will give an alarm	A. After the electro-suction lock is completed, the beeper will "beep" four times quickly, indicating that the electro-suction is normally locked in place at the secondary level.
	B. After the completion of the electro-suction, the buzzer does not sound, indicating that the electro-suction is normal and the secondary lock is not in place.
	C. After the electro-suction or spit out, hear a long cry of the buzzer for about 10 seconds, indicating the electro-suction failure (it may be that the electro-suction is stuck or not in good contact).
Electro-suction function	In the process of closing the trunk, it has the characteristics of stable speed, low sound and the like, so that the user experience is more comfortable.
Height setting function	The rear key adjusts the opening height of the trunk: When opening the door, manually adjust the trunk to the ideal height. Press the rear key for a long time and release it after hearing a long sound of the buzzer. The memory of the trunk height is successful. The trunk will open to this position next time. Note: The set height cannot exceed the preset height, otherwise it may cause the door to be unable to open and close normally.

Previous : How to download installation manual?

Next : Electric tailgate installation manual for Toyota RAV4 2019+ (GOLD & PINK ECU)